HMF Group A/S has designed a new crane series with a new stabilizer concept

10 June 2016

Print Page

HMF Group A/S has launched a new crane series from 6 to 9t, providing power-to-weight ratio for maximum utilization of the vehicle payload and for high lifting capacity.

The MC and MCS versions can be manually operated and the RC and RCS versions are radio remote controlled. The cranes are optimized by the HMF single Power Plus link arm system and a genuine over-bending of 15°, which combined with the main boom that can be raised into 90°, offer maximum lifting capacity in the entire working area.

The company says the hydraulic hoses of the crane are fed inside the column and are therefore particularly well protected from wear, sunlight and other mechanical stress.

The cranes are designed with double cross beam, which allows for a large and efficient stabilizer spread on the crane.

The cranes are available with stabilizer spreads of 3.4 m, 4.4m or 5.2m.

The stabilizer concept can offer the possibility of stepwise extension of the position and movement of the stabilizer leg from the simple to the sophisticated solution, for example fixed, vertical stabilizer leg, swing-up stabilizer leg in intervals of 45°.

The cranes can be equipped with many types of extra valves to meet most requirements for hydraulic accessory application such as rotator, clamshell bucket.

The crane series is available with the RCL 5300 Safety System to provide a large number of solutions for monitoring safety.

HMF Group A/S designed a new crane series with double cross beam, which allows for a large and efficient stabilizer spread on the crane.