Liebherr has unveiled the MK 88-4.2E, a four-axle mobile construction crane designed to meet lower weight limits for public-road operation in international markets.

The crane can be configured with an axle load of less than 9.2t and a gross vehicle weight below 36.3t, while also supporting 10- and 12t axle-load configurations.

Liebherr said the lower-weight configuration could help operators obtain road permits in countries with stricter limits for heavy goods vehicles.

The crane is fitted with 445/75 R22.5 tyres on aluminium rims, a change the company said could support access to markets including Australia, Denmark and the US.

The MK 88-4.2E retains much of the boom system used on the MK 88-4.1E, but its chassis and counterweight have been redesigned.

The counterweight is divided into removable sections, while the outrigger beams can also be detached to reduce axle loads during road travel.

An optional self-ballasting system allows the crane to install its counterweight without an auxiliary crane.

Ballast cylinders are integrated into the chassis, enabling the counterweight to be fitted or removed in two or three lifts, depending on the position of the ballast transport vehicle.

The crane can also be operated electro-hydraulically while supported and ballasted at a worksite. The system can draw power from the site or an external battery pack, allowing these operations to take place without direct CO₂ emissions, according to Liebherr.

A 16-ampere mains connection is fitted as standard, alongside optional 32- and 63-ampere connections.

The lower-capacity connection allows operation from sites with limited electrical supply, although at reduced speeds.

The MK 88-4.2E has a maximum lifting capacity of 8t and a maximum radius of 45m, where it can lift 2,200kg. It has a turning circle of 11.88m and independent rear-axle steering.

Liebherr’s Load-Plus control system can automatically increase lifting capacity by up to 10%, the company said. Crane operations are fully electric when connected to site power or another external source.

The crane is compatible with Liebherr’s Liduro Power Port mobile energy storage system. Where no external power supply is available, an integrated diesel generator can provide power for self-sufficient operation.

Series deliveries of the MK 88-4.2E are scheduled to begin in the second quarter of 2027.