With a load capacity of 110kNm and a reach of 6.6 – 8.6m, the new 118.2 VGL is initially being offered in four boom versions and three stabilising widths. In the H1-B4 stress group and enjoying a slew range of 410 degrees, its operating pressure is 250 bar and flow rate 100 l/min.
The 118.2 VGL has a single circuit hydraulic system that offers the standard “slew-lift-jib-extend-rotate-grab sequence,” according to Terex Atlas. The incorporation of an LS-control valve allows simultaneous independent operation of all functions to maximise operator productivity.
Other features include a new base with centralised column and in-line slew tubes to allow for control platforms on either side facing in either direction. A double platform and catwalk option is available.
When using double extension jibs, the second extension is driven in and out by a steel chain – an arrangement that allows the jib to be extended and retracted at twice the speed achievable with a traditional double ram arrangement. There are no external hose guides and the grab and rotator are contained within the jib itself.
Ground level controls are supplied for start, E-stop, lift and jib movement to allow the crane to be moved for tipping without the operator having to climb to the platform.
